Piaggio 575357 Weld-On Lock Support – Beverly, BV, X7 and X9 125-500

The Piaggio 575357 lock support is the weld-on bracket that holds the lock body on the chassis of Piaggio Beverly and BV maxi-scooters (125, 200, 250, 300, 350, 400 and 500), X7 (125, 250 and 300) and X9 (125, 180, 200, 250 and 500, also Evolution). It is the part that holds the compartment or seat lock in place: when the bracket deforms, detaches from the weld point, or breaks after an attempted break-in, the lock no longer engages and the compartment does not close. In the Piaggio catalog, it belongs to the frame/chassis group. New spare part, original Piaggio code, available for immediate delivery from Moon Bike S.r.l. — Cercola (NA).

✓ Strengths

• Original Piaggio code 575357 – the standard bracket, with the exact shape and support points of the bodywork
• One code for three families – Beverly and BV, X7 and X9, from 125 to 500, from historical catalogs up to 2021
• Body shop spare part – allows the lock to be repaired without replacing the bodywork
• Repair after attempted break-in – this is the first part to give way when someone forces the compartment
• Made of metal, to be welded – restores original sealing, unlike bolted patches
• New product, never mounted · shipped from Italy

Technical specifications

Vehicle compatibility

Compatibility source: official Piaggio spare parts catalog (B2B), group Frame / chassis, sections Beverly 125-500, X7, X9 and Historical Catalogs 1998-2005, EMEA, APAC and NAFTA markets. If your scooter is not listed, contact us with the VIN number before ordering.

Recommended products

• Beverly lock body and lock kit – if the lock has also been forced or no longer turns
• Seat opening cable – often breaks along with the support
• Primer and anti-rust paint – mandatory after welding, to protect the worked area
• Fuel cap 576376000P and luggage rack cover 623358000C – other Beverly body parts we have in stock

Who it's perfect for

This is the spare part for the workshop or body shop that encounters a Beverly with an under-seat compartment that no longer closes: the lock turns freely because the bracket holding it has bent or detached from the chassis. This happens due to wear, but especially after an attempted theft: whoever forces the compartment leverages that very point, and the support is the part that gives way. It is also the piece needed by those who are restoring a used maxi-scooter and do not want to spend on a new chassis. A single code covers Beverly, BV, X7, and X9 from 125 to 500: for a spare parts dealer, it is an item to keep on the shelf.

Frequently asked questions

What exactly is this part?
It is the lock body support: the metal bracket welded to the chassis that holds the lock in place. It is not the lock itself or the cylinder with the keys, which are separate spare parts. In the Piaggio catalog, it is in the frame/chassis group.

Is it screwed or welded?
It is welded. It is a "weld-on" support for the chassis: a welding machine is needed and it must be installed in a workshop or by a body shop. After welding, primer and paint must be reapplied to the worked area, otherwise it will rust quickly in a few seasons.

The lock turns freely: could this be the cause?
Yes, this is one of the typical cases. If the key turns but the compartment does not engage, very often the bracket has bent or detached and the lock is no longer aligned. Before ordering, look behind the lock: if the support is loose or detached, that's it.

Is it suitable for my scooter?
It covers Beverly and BV from 125 to 500 (from historical catalogs up to the BV 350 ST of 2021), X7 125, 250 and 300, and X9 125, 180, 200, 250 and 500 including the Evolutions. See the table above and, if in doubt, send us the VIN number.

Are the lock and keys included?
No. Only the support is provided. The lock body, cylinder, keys, and opening cable are separate spare parts: if you need them, ask us and we will check them in the catalog.

Is it original or a reproduction?
It is the original Piaggio code 575357, new and never mounted. For a bracket that needs to be welded and must hold the lock in alignment, the original shape is precisely what makes the difference between a lasting repair and one that will need to be redone in a year.

How long does it take to arrive?
The item is available in stock and is shipped from Italy. You will receive the tracking code as soon as the package leaves.