Piaggio WET292062901A0 Front Left Shock Absorber-Strut Assembly – Porter NP6 SW
$1,092.00
$1,519.00
-28%
Skip to product information
Piaggio WET292062901A0 Front Left Shock Absorber-Strut Assembly – Porter NP6 SW
$1,092.00
$1,519.00
-28%
Taxes included.
Shipping calculated at checkout.
Code: WET292062901A0
Last piece available
Same-day dispatch
Order within
and your item ships
Pickup currently not available
Shipping outside the European Union — duties payable by the recipient
This order ships outside the European Union and is subject to customs clearance in the destination country.
Export formalities and costs from Italy are on us and are already included in the price.
Import duties, taxes and clearance fees in the destination country are payable by the buyer. They are not included in the product price or the shipping cost, and we cannot calculate them: they are set by the customs authority of the destination country.
The carrier will not release the parcel until the recipient pays these charges. If the shipment is refused or the charges are left unpaid, the parcel is returned to us and shipping, return and any customs costs are deducted from the refund.
This order ships outside the European Union and is subject to customs clearance in the destination country.
Export formalities and costs from Italy are on us and are already included in the price.
Import duties, taxes and clearance fees in the destination country are payable by the buyer. They are not included in the product price or the shipping cost, and we cannot calculate them: they are set by the customs authority of the destination country.
The carrier will not release the parcel until the recipient pays these charges. If the shipment is refused or the charges are left unpaid, the parcel is returned to us and shipping, return and any customs costs are deducted from the refund.
Suggest your price, we'll reply within 24 working hours
The Piaggio WET292062901A0 front left shock absorber-strut assembly is the genuine spare part, cataloged as «gr. ammortizzatore-montante ant. SX», for the Piaggio Porter NP6 SW in the 2650 and 3070 wheelbase versions, both petrol/LPG and petrol/methane. It is the complete McPherson front left suspension corner: shock absorber with coil spring, steering knuckle/strut, and hub with brake disc and caliper, already assembled as shown in the photos. Product code WET292062901A0.
✓ Strengths
- Genuine Piaggio spare part – this is the code specified in the official "09.03 front suspension – shock absorbers" chart for the Porter NP6, not an aftermarket equivalent.
- Complete, pre-assembled unit – the photos show the shock absorber with spring and upper plate, steering knuckle/strut, hub with brake disc, brake caliper, and dust shield: a single piece instead of multiple parts to assemble one by one.
- OEM geometry – dimensions and mounting points match the factory-fitted component, ensuring suspension angles return to design specifications.
- Specific for the left side – the right side has a different code and is not interchangeable.
- Reduced workshop time – replacing the complete corner avoids the need to disassemble the hub, disc, and caliper on the bench.
Technical specifications
| Brand | Piaggio |
| Spare part code | WET292062901A0 |
| Official name | Gr. ammortizzatore-montante anteriore SX |
| Type | Complete front suspension assembly with strut |
| Side | Front left |
| Suspension type | McPherson |
| Spring | Coil |
| Color | Black (shock absorber and spring) · galvanized metal (mechanical parts) |
| Visible components in the assembly | Shock absorber with spring and upper plate · steering knuckle/strut · hub with brake disc · brake caliper · dust shield |
| Quantity required per vehicle | 1 |
| Package contents | 1 front left shock absorber-strut assembly |
| Delivery method | In-store pickup only in Cercola (NA) — not shippable |
⚠️ Important notes:
• In-store pickup only. Due to its weight and size, this item cannot be shipped: it must be collected at our facility in Cercola (NA), by appointment.
• The price refers to a single assembly, left side. The right side has a different code.
• After replacement, a wheel alignment and geometry check is required: without proper alignment, the tire will wear out quickly.
• Always compare the WET292062901A0 code with your vehicle's spare parts diagram: if in doubt, send us your VIN.
• In-store pickup only. Due to its weight and size, this item cannot be shipped: it must be collected at our facility in Cercola (NA), by appointment.
• The price refers to a single assembly, left side. The right side has a different code.
• After replacement, a wheel alignment and geometry check is required: without proper alignment, the tire will wear out quickly.
• Always compare the WET292062901A0 code with your vehicle's spare parts diagram: if in doubt, send us your VIN.
Vehicle compatibility
| Model | Years | Versions |
|---|---|---|
| Piaggio Porter NP6 SW | 2021-2022 | SW 2650 · SW 2650 M.Y. 2022 · SW 3070 · SW 3070 M.Y. 2022 · petrol/LPG and petrol/methane |
The list is taken from the official Piaggio spare parts catalog (B2B area). TW versions and ICE series are not covered by this code.
Who it is perfect for
This is the spare part needed by workshops or fleet managers who need to restore the front left suspension of a Porter NP6 SW after an impact, shock absorber failure, or hub wear: instead of ordering the strut, shock absorber, hub, disc, and caliper separately, you can install a single original assembly with the geometry already set correctly.
🛡️ Warranty and quality – Moon Bike S.r.l.
Genuine Piaggio spare part, new and never fitted. Moon Bike S.r.l. is based in Cercola (NA), is an authorized Piaggio Group dealer, and delivers with an invoice and manufacturer's warranty. This item must be picked up in person.
Genuine Piaggio spare part, new and never fitted. Moon Bike S.r.l. is based in Cercola (NA), is an authorized Piaggio Group dealer, and delivers with an invoice and manufacturer's warranty. This item must be picked up in person.
Frequently Asked Questions
Which vehicles is the Piaggio WET292062901A0 assembly fitted on?
It fits the Piaggio Porter NP6 SW in the 2650 and 3070 wheelbase versions, including M.Y. 2022 models, in petrol/LPG and petrol/methane engine configurations. The table above shows the exact versions specified in the official Piaggio catalog.
What exactly does the assembly include?
The product photos show the shock absorber with coil spring and upper plate, steering knuckle/strut, hub with brake disc, brake caliper, and dust shield, already assembled. It is the complete front left suspension corner, ready to be mounted on the vehicle.
Does it also fit the right side?
No. This code is specific to the left side; the right side has a different code and the two parts are not interchangeable. If you are unsure about the side, please note that the left side corresponds to the driver's side.
Why can't you ship it?
Due to its weight and dimensions, the assembly does not fall within the shipping conditions of the couriers we work with. The item is therefore only available for collection at our Cercola (NA) office: after placing your order, we will contact you to arrange a day and time.
Is wheel alignment necessary after installation?
Yes. When replacing a front suspension corner, alignment and suspension geometry must be checked and adjusted. This is a quick workshop procedure that prevents irregular tire wear and imprecise steering.
Frequently asked questions
Shipping times +
Shipping within 24-48 working hours in Italy. Tracking via SMS/email. Free pickup at our store in Cercola (NA), ready within 1 hour.
Returns and refunds +
You have 14 days from delivery to return the item without giving a reason. Free returns for faulty items. Full details
Payment methods +
Credit cards (Visa, Mastercard, American Express), PayPal, Apple Pay, Google Pay, Shop Pay, Klarna (pay in 3) and cash on delivery.
Warranty and authenticity +
All products come with a 24-month legal warranty. We are an Official Piaggio Group Dealer: original spare parts are certified with a verifiable OEM code.
Technical support +
Our technical team is available on WhatsApp +39 392 456 1248 Mon-Fri 9:00–13:30 / 14:30–18:00 (Italian time), or by email.