Kappa Z790RK EPDM Gasket for K47 and K37 Cases
¥1,400
¥1,700
-17%
Skip to product information
Kappa Z790RK EPDM Gasket for K47 and K37 Cases
¥1,400
¥1,700
-17%
Taxes included.
Shipping calculated at checkout.
Codice: Z790RK
Pickup available at Moon Bike S.r.l.
Usually ready in 1 hour
Proponi il tuo prezzo, ti risponderemo entro 24h lavorative
The Kappa Z790RK sealing gasket is the original EPDM rubber replacement part for Kappa K47 and K37 cases. It is the profile that runs along the mating edge between the lid and base, ensuring a seal against water, dust, and infiltration. Over time, the rubber compresses, dries out, and cracks: replacing it is the most economical way to make your case truly waterproof again. A Kappa Moto product, a brand of the GIVI S.p.A. group.
✓ Strengths
- EPDM Rubber – specific elastomer for gaskets, resistant to water, ozone, and UV rays
- Original Kappa replacement part – identical cross-section and length to the standard gasket
- Restores seal – stops water and dust infiltration into the case
- Resistant to temperature fluctuations – does not harden in the cold or deform in the heat
- Glue-free installation – pressure-fits into the edge groove
- Minimum cost, immediate effect – the case becomes waterproof again like new
Technical specifications
| Brand | Kappa (GIVI S.p.A. group) |
| Product code | Z790RK |
| EAN | 8029871102097 |
| Type | Sealing gasket (replacement part) |
| Material | EPDM rubber |
| Color | Black |
| Compatibility | Kappa K47 and K37 cases |
| Condition | New, original replacement part |
⚠️ Important notes:
• Before installation, thoroughly clean the gasket groove: residues and dirt compromise the seal.
• No glue needed: the gasket should be press-fitted into the edge groove, just like the original.
• Replace it if you notice water infiltration, or if the rubber appears compressed, dry, or cracked.
• The case is not included: this item is the replacement gasket only.
• Before installation, thoroughly clean the gasket groove: residues and dirt compromise the seal.
• No glue needed: the gasket should be press-fitted into the edge groove, just like the original.
• Replace it if you notice water infiltration, or if the rubber appears compressed, dry, or cracked.
• The case is not included: this item is the replacement gasket only.
Compatibility
| Model | Notes |
|---|---|
| Kappa K47 | EPDM sealing gasket |
| Kappa K37 | EPDM sealing gasket |
Recommended accessories
- Kappa ZK47FNM – black fitted bottom replacement for K47 top case
- Kappa replacement locks and plates – to fully restore the closure
- Inner bag for case – protects contents and facilitates loading
Who it's perfect for
The Z790RK is the replacement part that solves the most annoying problem for those who travel with cases: opening them at the end of a journey and finding everything wet. If your Kappa K47 or K37 is a few years old and the original gasket is now compressed or cracked, this EPDM profile restores its factory seal with minimal expense and ten minutes of work.
🛡️ Warranty and quality – Moon Bike S.r.l.
Original Kappa product (GIVI S.p.A. Group brand). Moon Bike S.r.l. is an authorized Kappa reseller based in Cercola (NA). All spare parts are original, traceable, and covered by the manufacturer's official warranty.
Original Kappa product (GIVI S.p.A. Group brand). Moon Bike S.r.l. is an authorized Kappa reseller based in Cercola (NA). All spare parts are original, traceable, and covered by the manufacturer's official warranty.
Frequently Asked Questions
When should the gasket be replaced?
When you notice water or dust infiltration inside the case, or when the rubber appears compressed, dry, or cracked.
Is glue needed for installation?
No. The gasket is press-fitted into the edge groove of the case, exactly like the original.
What is EPDM?
It is an elastomer specifically used for gaskets: it resists water, ozone, UV rays, and temperature fluctuations much better than common rubbers.
Is it an original Kappa replacement part?
Yes, it is the original Kappa Moto gasket, not a universal profile to be adapted.
Domande frequenti
Tempi di spedizione +
Spedizione in 24-48h lavorative in Italia. Tracking via SMS/email. Ritiro gratuito presso la nostra sede di Cercola (NA) disponibile in 1 ora.
Reso e rimborso +
Hai 14 giorni dal ricevimento per restituire l'articolo senza dover fornire motivazioni. Reso gratuito per articoli difettosi. Tutti i dettagli
Metodi di pagamento +
Carte di credito (Visa, Mastercard, American Express), PayPal, Apple Pay, Google Pay, Shop Pay, Klarna (rateizza in 3), bonifico bancario e contrassegno alla consegna.
Garanzia e originalità +
Tutti i prodotti hanno garanzia legale di 24 mesi. Siamo Rivenditore Ufficiale Piaggio Group: i ricambi originali sono certificati con codice OEM verificabile.
Assistenza tecnica +
Il nostro team tecnico è disponibile via WhatsApp +39 392 456 1248 Lun-Ven 9:00–13:30 / 14:30–18:00, oppure via email.