Piaggio 656743 Chrome Side Plate Beverly 166x23 mm – Beverly 125, 250, 300, 400 and 500

The Piaggio 656743 side badge is the chrome «Beverly» emblem that goes on the side of the scooter. It measures 166 × 23 mm, comes with double-sided tape already applied to the back, and is a genuine Piaggio spare part, not a printed adhesive reproduction: it is a single piece in mirror-finish chrome plastic, with raised cursive letters and beveled edges (observed from product photographs). It is the detail missing on half of the Beverlys on the road, because it comes off with a pressure washer and never comes back.

✓ Key features

• Genuine Piaggio spare part, catalog code 656743 — same font, same spacing, and same chrome finish as the factory-installed part
• Structural double-sided tape already applied to the back: just peel off the protective film and place it. No need to buy tape or glue, and no need to know how to apply them
• Single piece: the letters are connected, they are not loose characters to be aligned by hand one by one (observed from product photographs)
• Mirror chrome finish, not silver adhesive film: it reflects and has depth, you can see the difference from half a meter away (observed from product photographs)
• Raised letters with beveled edges, which catch the light along the entire profile (observed from product photographs)
• Exact size 166 × 23 mm: fits within the footprint left by the original badge, with no exposed residue marks to cover up
• Covers the entire Beverly family from 125 to 500, including RST and Tourer models: one single code for ten years of production

Technical specifications

The features indicated as observed from photographs are derived from direct examination of the part in stock. Catalog data may be updated by Piaggio without notice.

Vehicle compatibility

Compatibility list from official Piaggio spare parts catalog: 6 families, 11 versions. If your Beverly is not in the table, contact us for more information before ordering: we will check it for you in the catalog.

It is one of those spare parts that costs little and is very noticeable. A Beverly with a bare side panel or with a faded badge looks neglected even if the rest is in good shape; replacing it is a ten-minute job and changes the look of the vehicle, especially if you are about to sell it. We ship within 24/48 hours from Cercola. If you have any doubts about the version or you also need the engine capacity badge, contact us for more information.

Who is it perfect for?

• Those who lost the badge at the car wash or with a pressure washer — this is the most common way by far
• Those whose badge is faded, yellowed, or has peeling chrome after years in the sun
• Those who are refurbishing a Beverly to sell it: it's the missing details that lead to price haggling
• Those who have repainted or replaced the side panel and need to reassemble the inscription
• Workshops and body shops that are finishing a job and want the catalog part, not a plotter-cut sticker

Frequently Asked Questions

Do I need to buy glue or double-sided tape?
No. The badge arrives with structural double-sided tape already applied to the back: remove the protective film, place, and press. Nothing else to buy, and no risk of using the wrong type of glue — generic silicone and mastic only cause damage to a chrome badge.

Do I need one or two?
The Beverly mounts one badge per side. The supply is for one piece: if you want to replace both, order quantity 2. Practical advice: if one is faded, the other one almost always is too, and two new ones next to an old one will be noticeable.

Is it a sticker or a real chrome piece?
It is a mirror-finish chrome plastic piece with raised letters, not a printed film (observed from product photographs). It has depth and reflects light along the beveled edges: it is exactly what the stock Beverly comes with.

My spare parts dealer gave me code 622051, is it the same?
Yes. 622051 is the previous code, replaced by Piaggio with 656743. It is the same piece with updated numbering.

Does it also include the engine capacity inscription?
No. This is only the «Beverly» inscription. The numbers (125, 250, 300, 500) and the markings «Cruiser», «Tourer», «RST» are separate badges with their own codes: write to us which one you need and we will order it for you.

How do I remove the old one without ruining the side panel?
Heat it slightly with a hair dryer, run a nylon thread behind the badge, and saw through the adhesive. Then remove the glue residue with a rubber adhesive eraser wheel at low speed or with a specific product. No screwdrivers or blades: the side panel will get scratched and the scratch will remain.

Will it fit my recent Beverly 350 or 400?
The table above is the official catalog list and covers the 2005-2010 generations, plus the RST from historic catalogs. Later Beverlys have different graphics: send us the model and year and we will tell you which is the correct code for yours.