Piaggio 600183 Center Stand – Liberty 50, 100, 125, 150 and 200 4T, Scarabeo 50 and 100 4T

The Piaggio 600183 center stand is the kickstand that keeps your scooter upright when parked. It is the original Piaggio spare part made of black painted steel tubing, the same one factory-fitted on the entire Liberty 4T family and on the Scarabeo 50 and 100 4T. A bent stand, one with a worn-out spring, or ovalized bushings is not just an aesthetic defect: it is the reason why a scooter falls over while parked, and when it falls, it takes the mirror, fairing, and brake lever with it.

✓ Key strengths

• Original Piaggio spare part, catalog code 600183 — same geometry and same hole center-to-center distance as the factory-fitted part
• Pivot bushings already installed and spring hook plate already welded: you don't need to salvage anything from the old one (as identified from product photographs)
• Support lever with rubber footpad already installed, the one you push with your foot (as identified from product photographs)
• Black painted tubular steel, just like the factory part: it is not bare metal waiting to be painted (as identified from product photographs)
• Original geometry: the tilt angle and ground clearance are exactly as designed by Piaggio. With aftermarket stands, the scooter often remains too tilted or too upright, and it is unstable in both cases
• One code for nine model families: Liberty from 50 to 200, Scarabeo 50 and 100 4T, Runner VX 125. It covers fifteen years of production
• Costs a fraction of what it costs to repair a fairing after the vehicle falls while parked

Technical specifications

The characteristics identified from the photographs are based on direct inspection of the item in stock. Catalog data may be updated by Piaggio without notice.

Vehicle compatibility

Compatibility list from the official Piaggio spare parts catalog: 3 brands, 9 families, 40 versions. If your model is not in the table, contact us for more information before ordering: we will verify it for you in the catalog.

The center stand is one of those parts that no one looks at until it fails, and when it fails, the scooter ends up on the ground while parked. On a Liberty or Scarabeo that has a few years on it, it is a check worth doing: put it on the stand and try to push it sideways. If it wobbles, it's time. We ship in 24/48 hours from Cercola. For any doubts about your model or to order the spring as well, contact us for more information.

Perfect for

• Those with a bent or twisted stand after a fall while parked or an incorrect maneuver
• Those who feel the scooter is unstable on the stand — it wobbles if pushed, or remains too tilted
• Those with ovalized pivot bushings: they come brand new and pre-installed here
• Those who have feet worn down to the metal and have already scratched their garage floor
• Those restoring a Liberty or Scarabeo taken out of storage after years
• Workshops that keep high-turnover parts in stock: a single code covers nine families and fifteen years of production

Frequently Asked Questions

Is the spring included?
No. The package contains the stand with bushings, hook plate, and rubber footpad already installed, but the return spring is a separate spare part (as identified from product photographs). Write us your model and year, and we will give you the right code so you can place one single order.

My scooter fell while parked: is the stand to blame?
Almost always yes, and it is due to one of these three things: bent stand (the support is no longer symmetrical), ovalized bushings and pins (the stand has lateral play), or worn feet (it slides on smooth flooring). Place the vehicle on the stand and push it sideways: if it moves, you found the culprit.

Why doesn't the stand go back up on its own?
It is a weak return spring, not the stand. Changing only the stand without changing the spring will not fix it: order them together.

Does the same stand fit on both the Liberty 50 and the Liberty 200?
Yes, on all 4T versions listed in the table. Piaggio uses the same chassis base for the Liberty 4T family, and the Scarabeo 50 and 100 4T share the same architecture. Note, however: the 2T versions are not on this list.

Can I install it by myself?
If you have a way to hold the scooter up (workshop stand, lift, or someone helping you), yes: it's just two pins and a spring. Without support, it cannot be done because, by removing the stand, the vehicle has nothing left to support it.

Is it painted, or does it need to be painted?
It arrives already painted black, like the factory part (as identified from product photographs). Tip: before installing it, apply a light coat of grease to the pins and inside the bushings so that it doesn't oxidize in areas you won't be able to reach later.

Is this the side stand?
No. This is the center stand, the one with two legs that lifts the rear wheel. The side stand has a different code: write to us, and we will find it for you.